Water Softening System

Water Softening Systems

Calcium and magnesium in the cationic ion class are the most important factors determining water hardness when in solution. Hard water is difficult to repair in households, such as plumbing and water washing machines. One of the most effective ways to overcome these problems is by using the ion exchange method. Calcium and magnesium ions are replaced by water sodium ions. Thus, the water softening process can be performed with the cationic resin. The tampon material of the softening unit can be applied as optional FRP or is produced from AISI 304-316 stainless steel. The automation of the water softening unit can be grouped under 3 main headings.

Time Controlled

As a time period, the regeneration process is automatically performed on the desired day of the week without any intervention at the desired time.

Flow Controlled

It automatically regenerates the unit when it reaches the amount of regeneration previously programmed or set by measuring the amount of water passing through a meter on the unit.

Hardness Measurement Control

These types of water softening devices, controlled by a central control panel, continuously measure the water hardness value and automatically regenerate the unit when it exceeds the desired hardness value due to the previously set program. Regeneration of water softening units is accomplished using salt.

 

Tandem water softening systems are very suitable and economical systems for the industry that consume 24 hours uninterrupted water and the hardness of very high hardness water.
All control valves used in tandem softening systems automatically perform service, regeneration and backwashing operations.
Tandem softening systems are governed by the signals from the valve system operating according to the capacity.
One of the softening tanks continues to soften while the other is backwashed, so that the softening process is uninterrupted.

Areas of applicatio : for softening of boiler feed water and cooling towers, process water for softening of industrial, drinking and using water in irrigation

Standard Specifications

  • Corrosion resistant FRP (fiber-wound) to the body,

  • ST37 carbon steel

  • AISI 304/316 stainless steel

  • Programmable automatic valve

  • Salt salt tank and automatic drive system

  • Great capacity of electric actuated valve

  • Flow rates or time-controlled

  • Automatic backwash time adjuster

  • 3-6 bar working pressure

  • Max. 10 bar test pressure

  • Max. 40 C operating temperature

  • Power supply 220 V / 50 Hz

Water Softening System